28-40pin UniBoard

UniBoard at work.

Uniboard is the main circuit board on which is developed a series of exercises to be published on the site.

Obviously, the exercises can be followed with any other hardware, but the use of Uniboard greatly facilitate.

The card is achievable home-made, but it is also available on printed circuit board with solder, screen printing and finishing pond, which can be ordered from our laboratory for immediate delivery.

The board, on request, can be supplied fully assembled and tested.

Uniboard connected to Pickit3 and fed directly from this

Uniboard, with its power supply stand alone, connected to the REAL ICE and a display-keyboard ead other devices for debugging firmware.

Future expansion.

A wide range of accessories will complete the project Uniboard, but it will always be an easily reproducible with simple means, in 'perspective to provide the investigator with a financial support, but the most efficient.
At the time have been implemented:

• Uniboard power stand alone format, with selectable voltage from 2 to 5.5 V. Input from rechargeable NiCd or LiIon, with currents from 300 mA to 2A.
• various interfaces RS-232, RS-485 or Current Loop
• Bluetooth serial adapter
• real time clock module in SPI and I2C
• LCD display modules Universal support of standard components from 1 to 4 lines, with options for operation at 5 and 3V, generator-Vee on board and connection to I / O or keyboard
• LCD modules for DOG Electronic Assembly, with the possibility of connecting both parallel and serial
  modules buttons / switches
• SSR and relay modules

• module 7-segment display up to 8 digits

These units will be presented with the 'advance of the Course of Instruction.
In any case, the modulated structure connectors easily connect both devices made ​​at home, and those of many other manufacturers.